Certifications and Approvals

Bull Importer manages the obtaining of a wide variety of certifications and approvals, without which products cannot be marketed.

CONTACT US

Each type of product is subject to specific technical, safety, and quality requirements set by various geographical bodies (global, EU, Spanish). Knowledge of the applicable standards and regulations in each region is essential for the success of any importation or production outsourcing process.

We manage, among others, the following official certificates and approval seals:

  • CE (Conformité Européenne): CE is a mark added to the labeling to declare that the product meets the minimum safety requirements set by EU regulations. It is an approval seal necessary for importing an extensive list of products, including toys, safety footwear, machinery, refrigerators, elevators, or medical products, into any country of the European Economic Area. There is no certification agency; instead, it is the responsibility of the importer to ensure that the product complies with the relevant European directive. Wikipedia entry on the CE mark

  • Ecocert: Ecocert certificates certify that a product has been entirely made with ecological ingredients and processes. They are used in the agricultural, textile, detergent, and natural and ecological cosmetics sectors. They are issued by the Ecocert Group, headquartered in France, with subsidiary offices in other countries. The Ecocert Group also conducts certifications on environmental responsibility.

  • EN 60204, Machine Safety – Electrical Equipment of Machines: A series of standards that regulate the safety of electronic components of industrial machinery. Bull Importer utilizes this set of standards (some of which are not yet translated into Spanish) to prepare the test report and thus homologate machines such as industrial juicers. Standards of the EN 60204 series can be found in the catalog of AENOR.

  • EN ISO 12312-1:2013, Eye and Face Protection – Sunglasses and Related Eyewear – Part 1: Sunglasses for General Use (ISO 12312-1:2013) (Ratified by AENOR in August 2015) and its supplement EN ISO 12312-1:2013/A1:2015, Eye and Face Protection – Sunglasses and Related Articles – Part 1: Sunglasses for General Use (ISO 12312-1:2013/Amd 1:2015) (Ratified by AENOR in November 2015): We conduct the test report and certify sunglasses according to this international standard.

  • LACON certificates, like Ecocert, are used to certify organic production. They are applicable only to the agricultural sector, apiculture, fish farms, and the food industry. They are issued by the Lacon Institute, headquartered in Austria.

  • RoHS (Restriction of Hazardous Substances): RoHS is a European certification mark for electronic products that contain hazardous substances (lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE) in any of their components. By using this mark, the manufacturer declares that the product complies with Directive 2002/95/EC, and therefore the amount of these substances in the device does not exceed the maximum allowed. The importer is responsible for ensuring compliance with this requirement before national and European authorities.

UNE’s

  • UNE-EN 1022:2005, Furniture – Domestic seating – Determination of stability: This standard applies to the evaluation process of chairs, from which the test report is obtained to verify the quality of the chairs.

  • UNE-EN 581-1:2006, Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 1: General safety requirements, and UNE-EN 581-2:2016, Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 2: Mechanical safety requirements and test methods for seating: Bull Importer carries out the test report to verify that the outdoor furniture manufactured complies with these standards, following the methods stipulated in the second part. Norma UNE-EN 581-1:2006 and Norma UNE-EN 581-2:2016 in the AENOR catalog.

  • UNE-EN 1728:2013, Furniture – Seating – Test methods for the determination of strength and durability: Like the previous one, this standard defines methods for evaluating the quality of manufactured chairs. Norma UNE-EN 1728:2013 in the AENOR catalog.

  • UNE-EN ISO 12100:2012, Safety of machinery – General principles for design – Risk assessment and risk reduction (ISO 12100:2010): This standard is used to evaluate industrial machinery, such as juicers for the food sector. We conduct the testing report at the source to certify compliance. Norma UNE-EN ISO 12100:2012 in the AENOR catalog.

  • UNE-EN 12520:2016, Furniture – Strength, durability, and safety – Requirements for domestic seating: Bull Importer conducts the testing report to verify that the manufactured chairs comply with this standard. Norma UNE-EN 12520:2016 in the AENOR catalog.

  • UNE-EN ISO 17075:2008, Leather – Chemical tests – Determination of chromium VI content (ISO 17075:2007): This standard establishes analysis procedures to determine the levels of hexavalent chromium in products made of leather, such as safety footwear. Norma UNE-EN ISO 17075:2008 in the AENOR catalog.

  • UNE-EN ISO 20344:2011, Personal protective equipment – Test methods for footwear (ISO 20344:2011): We conduct the testing report according to the methodology established in this standard. Norma UNE-EN ISO 20344:2011 in the AENOR catalog.

  • UNE-EN ISO 21898:2006, Packaging – Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004): We follow this standard to certify big bags. Norma UNE-EN ISO 21898:2006 in the AENOR catalog.

Do you have any questions?

Contact us.

Su mensaje ha sido correctamente
No se ha podido entregar el mensaje, vuelve a intentarlo o contacta con el administrador.